Star Wars Lightsaber Crochet Pattern: Part 1 – Blue Lightsaber

Since making my crochet R2-D2 I have been thinking about making some crochet lightsabers but I wasn’t too sure whether I would be able to make something that would look ok. After much deliberation I thought I would give it a go and see what I could come up with. After a while of researching lightsabers (I never realised there were so many different ones!) I got cracking on making the lightsaber using a rough design I sketched up based on some I had seen. After completing it I was very pleased with how it came out, so much so in fact I’ve decided to make a couple of other slightly different ones including a dark green, light green and mini lightsaber.

Other Star Wars patterns available include: Yoda Bookmark, BB8

Blue lightsaber Pattern


Materials 

  • 4mm hook
  • DK wool in grey (50g ball)
  • DK wool in black (50g ball)
  • DK wool in blue (50g ball)
  • DK wool in red (small amount)
  • Needle
  • Toy stuffing


Lightsaber Handle

In grey.

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into each sc.

Round 2: 2sc into same sc, sc. Repeat around.

Round 3: 2sc into same sc, 2sc. Repeat around.

Round 4: 2sc into same sc, 3sc. Repeat around.

Round 5: sc around into back loop only.

Rounds 6-32: sc around.

Change to black.

Rounds 33-34: sc around.

Change to grey.

Rounds 35-38: sc around.

Fasten off.


Lightsaber Band

In grey.

ch7.

Row 1: sc into 2nd ch from hook, sc along rest of the row.

Rows 2-36: ch1 (doesn’t count as a stitch) sc along row.

Fasten off.


Lightsaber Band Button

In grey.

ch6.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Rows 2-3: ch1 (doesn’t count as a stitch) sc along row.

Row 4: sc around the edge (down the side, along the bottom, up the other side, along the top).

Row 5: sc around in back loops only.

Fasten off, leaving long length to attach.


Red Dot  

In red.

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into same sc, sc.

Fasten off, leaving long length to attach.


Black Strips (Make 8)

In black.

ch11.

Row 1: sc into 2nd ch from hook, sc along rest of the row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.


Coloured Light Beam 

In blue.

ch25, slip stitch into first stitch to make a round.

Rounds 1-20: sc around.

Round 21: sc2tog 4sc, 4 times, sc.

Rounds 22-41: sc around.

Round 42: sc2tog 3sc, 4 times, sc.

Rounds 43-57: sc around.

Round 58: sc2tog 2sc, 4 times, sc.

Rounds 59-63: sc around.

Round 64: sc2tog sc, 4 times, sc.

Round 65-66: sc around.

Round 67: sc2tog, 4 times, sc.

Fasten off leaving long length to attach.


To Assemble

  • Sew on the red dot.
  • Sew on the grey band to the handle and sew on the button placing a small amount of stuffing in first.
  • Sew on the black strips vertically around the handle.
  • Stuff the handle and light beam. You could also place a cardboard tube into the light beam and handle to make them both stronger and less flexible.
  • Sew on the light beam.


Crochet Yoda Book Buddy Pattern Bookmark Pattern

I seem to be on a bit of a bookmark making run at the moment, I started with some folded paper ones and moved on to a fabric one, then while making some crochet squares the other day an idea came to mind – lets try a crochet one!.

I’ve had some green wool on my desk for a while now and the shade of the green gave me the idea to try and make a Yoda themed book buddy. So I got making some squares and got folding them! After I made the squares and got them all folded all I need to do was make some black eyes and get them attached.

After this Yoda success I think there may be a few more of these buddies…….

Yoda Book Buddy Pattern:

4mm hook, 50g DK wool in green.

ch24, sc into 2nd ch from the hook, sc along rest of the row.

Row 1: ch1 (doesn’t count as a stitch) sc along rest of the row.

Row 2: ch1 (doesn’t count as a stitch) htr(UK)/hdc(US) along rest of the row.

Rows 3-4: Repeat row 1.

Row 5: Repeat row 2.

Rows 6-7: Repeat row 1.

Row 8: Repeat row 2.

Rows 9-10: Repeat row 1.

Row 11: Repeat row 2.

Rows 12-13: Repeat row 1.

Row 14: Repeat row 2.

Rows 15-16: Repeat row 1.

Row 17: Repeat row 2.

Rows 18-19: Repeat row 1.

Row 20: Repeat row 2.

Row 21: Repeat row 1.

Fasten off.

Size (approx. 12x12cm)

Eyes

4mm hook, 25g DK wool in black.

Make a magic ring, ch1, 4sc into ring.

Fasten off, leaving a long thread to attach.

Fold the bottom right of the square to the top left corner. Next fold the top layer of the square to the middle.

  • Sew down each side of the folded layer to secure (sewing through both layers).
  • Fold in the two side corners, and sew the middle of top edge down by 1cm. Then fold the sides back out to make the ears.
  • Sew on the two eyes.

Star Wars Crochet Pattern: BB8

I thought it was about time I made a companion for my R2-D2 so I got going on a BB8 pattern.


Crochet BB8 pattern

Materials 

  • 4mm hook
  • Needle
  • White/cream DK wool
  • Black DK wool
  • Orange DK wool
  • Grey DK wool

BB8 Body

In white/cream make a magic ring, ch1, 6sc into ring

Round 1: 2sc into each sc
Round 2: sc, 2sc into next stitch. Repeat around
Round 3: 2sc, 2sc into next stitch. Repeat around
Round 4: 3sc, 2sc into next stitch. Repeat around
Round 5: 4sc, 2sc into next stitch. Repeat around
Round 6: 5sc, 2sc into next stitch. Repeat around
Round 7: 6sc, 2sc into next stitch. Repeat around
Round 8: 7sc, 2sc into next stitch. Repeat around
Round 9: 8sc, 2sc into next stitch. Repeat around
Round 10: 9sc, 2sc into next stitch. Repeat around
Round 11: 10sc, 2sc into next stitch. Repeat around
Round 12: 11sc, 2sc into next stitch. Repeat around
Round 13-21: sc around
Round 22: 11sc, sc2tog
Round 23: 10sc, sc2tog
Round 24: 9sc, sc2tog
Round 25: 8sc, sc2tog
Round 26: 7sc, sc2tog
Round 27: 6sc, sc2tog
Round 28: 5sc, sc2tog
Round 29: 4sc, sc2tog
Round 30: 3sc, sc2tog
Stuff
Round 31: 2sc, sc2tog
Round 32: sc, sc2tog
Round 34: sc2tog
Fasten off

BB8 Head

In white/cream make a magic ring, 6sc into ring
Round 1: Round 1: 2sc into each sc
Round 2: sc, 2sc into next stitch. Repeat around
Round 3: 2sc, 2sc into next stitch. Repeat around
Round 4: 3sc, 2sc into next stitch. Repeat around
Round 5: 4sc, 2sc into next stitch. Repeat around
Round 6: 5sc, 2sc into next stitch. Repeat around
Round 7: 6sc, 2sc into next stitch. Repeat around
Round 8: 7sc, 2sc into next stitch. Repeat around
Round 9: In the back loops only sc around
Change to grey
Round 10-11: sc around
Change to orange
Round 12L 7sc, sc2tog. Repeat 5 times, then change to white, 7sc, sc2tog
Round 13: 6sc, sc2tog. Repeat around
Round 14: 5sc, sc2tog. Repeat around
Rounds 15-16: sc around
Round 17: 4sc, sc2tog. Repeat round
Round 18: sc around
Change to orange
Round 19: 3sc, sc2tog. Repeat around
Change to white
Round 20: 2sc, sc2tog. Repeat around
Change to grey
Round 21: sc, sc2tog. Repeat around
Stuff
Change to white
Round 22: sc2tog, repeat around.
Fasten off

BB8 Body Circles – Make 6

Starting in white, make a magic ring, ch1, 6sc into ring
Round 1: 2sc into each sc
Round 2: sc, 2sc into next stitch. Repeat around
Round 3: 2sc, 2sc into next stitch. Repeat around
Round 4: 3sc, 2sc into next stitch. Repeat around
Change to orange

Round 5: 4sc, 2sc into next stitch. Repeat around
Fasten off leaving long thread to attach

Sew On Details:

For the orange edge detail – in four places sew 6 overstitches from the edge of the circle to 2 rows down on the white section.

Grey details – sew on using over stitches to make the pattern you want.

Black Circles

Large

In black , make a magic ring, ch1, 6sc into ring

Round 1: 2sc into each sc

Round 2: sc, 2sc into next stitch. Repeat around
Fasten off leaving long thread to attach

Small

In black , make a magic ring, ch1, 6sc into ring

Fasten off leaving long thread to attach
Sew the body circles on to the body, then sew on the head and add the black circle details.

Star Wars Lightsaber Crochet Pattern: Part 4 – Dark Green Lightsaber


Since making my Star Wars third lightsaber – light green mini (first – blue and second – light green) I have been wanting to make just one more (for now…!) and again opted for a green beam.

Star Wars lightsaber crochet pattern

Materials

  • 4mm hook
  • Grey DK wool
  • Green DK wool
  • Yellow DK wool
  • Black DK wool
  • Red DK wool


Lightsaber Beam

In green:

ch25, slip stitch into first ch to make a round.

Rounds 1-25: sc around.

Round 26: sc2tog, 4sc. Repeat 4 times, sc.

Rounds 27-50: sc around.

Round 51: sc2tog, 3sc. Repeat 4 times, sc.

Rounds 52-65: sc around.

Round 66: sc2tog, 2sc. Repeat 4 times, sc.

Rounds 67-74: sc around.

Round 75: sc2tog, sc. Repeat 4 times, sc.

Rounds 76-80: sc around.

Round 81: sc2tog, repeat 4 times, sc.

Fasten off.


Lightsaber Handle

In black:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into each sc.

Round 2: 2sc into next sc, sc. repeat around.

Round 3: 2sc into next sc, 2sc. Repeat around.

Round 4: 2sc into next sc, 3sc. Repeat around.

Round 5: sc around into back loops only.

Round 6: sc around.

Change to grey:

Rounds 7-25: sc around.

Change to black:

Rounds 26-36: sc around.

Change to grey:

Rounds 37-42: sc around.

Change to black

Rounds 43-44: sc around

Change to yellow:

Round 45: sc around.

Fasten off leaving long thread to attach beam.

Black Dot

In black:

Make a magic ring, ch1, 5sc into ring.
Round 1: 2sc into each sc.
Fasten off leaving long thread to attach.

Black Band Piece 1

ch9, sc into 2nd ch from the hook, sc along rest of the row.

Rows 2-36: ch1 (doesn’t count as a stitch) sc along row.

Fasten off leaving long thread to attach.


Black Band Piece 2

In black:

ch6, sc into 2nd ch from the hook, sc along rest of the row.

Rows 2-36: ch1 (doesn’t count as a stitch) sc along row.

Fasten off leaving long thread to attach.


Green Detail Piece

In green:

ch4, sc into 2nd ch from the hook, sc along rest of the row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.

Row 3: ch1 (doesn’t count as a stitch) sc2tog, sc.

Row 4: ch1 (doesn’t count as a stitch) sc2tog.

Fasten off leaving long thread to attach.


Black Dot Detail On Green Detail Piece

In black:

Make a magic ring, ch1, 5sc into ring.

Round 1: 2sc into each sc.

Fasten off leaving long thread to attach.


Yellow Detail Piece

In yellow:

ch4, sc into 2nd ch from hook, sc along rest of the row.

Rows 2-3: ch1 (doesn’t count as a stitch) sc along row.

Row 4: ch1 (doesn’t count as a stitch) sc2tog, sc.

Row 5: ch1 (doesn’t count as a stitch) sc2tog.

Fasten off leaving long thread to attach.


Red Dot

In red:

Make a magic ring, ch1, 3sc into ring.

Fasten off leaving long thread to attach.

Black Strips – Make 7

In black:

ch14, sc into 2nd ch from hook, sc along rest of the row.

Row 2: ch1 (doesn’t count as a stitch) sc along rest of the row.

Fasten off leaving long thread to attach.

Black Piece To Go Above The Green Detail Piece

In black:

ch4, sc into 2nd ch from the hook, sc along rest of the row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.

Fasten off, leaving long thread to attach.

  • Sew the details onto the lightsaber handle: for the black wrap pieces first wrap the bigger wrap piece around the lightsaber handle (the ch9 one) and sew into place, then wrap the smaller piece around on top and sew to secure.
  • Stuff the lightsaber handle and beam and sew onto the handle – You could put some cardboard or plastic tubing inside the beam when stuffing it to make it a bit more sturdy.



Star Wars Lightsaber Crochet Pattern: Part 3 – Light Green Mini Lightsaber


I had few more Star Wars lightsabers I wanted to make after my previous two Star Wars lightsaber makes (blue and light green) and decided it was about time I got them made!


Here is a slightly smaller one compared to the previous blue and green, and I’ve used green for the beam.


I still have one more I have an idea for…well, you can never have too many!

Crochet Star Wars lightsaber pattern: 

Materials

  • 100g ball dk wool in light grey
  • 100g ball dk wool in black
  • 100g ball dk wool in dark green
  • 4mm hook

Lightsaber Handle  

Starting in grey:
Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into same sc, repeat around.

Round 2: 2sc into same sc, sc. Repeat around.

Round 3: 2sc into same stitch, 2sc. Repeat around.

Round 4: 2sc into same stitch, 3sc. Repeat around.

Round 5: sc around into the back loop only.

Rounds 6-20: sc around.

Change to black:

Rounds 21-30: sc around.

Change to grey:

Rounds 31-38: sc around.

Change to black:

Round 39: sc around.

Round 40: sc2tog, 3sc. Repeat around.

Round 41: dc around.

Round 42: 2sc into same sc, 2sc. Repeat around.

Fasten off, leaving long thread.

Black Lightsaber Band
In black:

ch8.

Row 1: sc into 2nd ch from hook, sc along row.

Rows 2-36: ch1 (doesn’t count as a stitch) sc along row.

Fasten off, leaving long thread.


Band Button

Big part:

In black

ch6.

Row 1: sc into 2nd ch from hook, sc along row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.

Now working in the round.

Round 1: sc around the 4 edges.

Round 2: sc around.

Fasten off leaving long thread.

Smaller part:

In black

ch4.

Row 1: sc into 2nd ch from hook, sc along row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.

Now working in the round:

Round 1: sc around the 4 edges.

Silver Clip At The Top Of The Lightsaber

In grey:

ch5.

Row 1: sc in 2nd ch from hook, sc along row.

Rows 2-4: ch1 (doesn’t count as a stitch) sc along row.

Row 5: ch1 (doesn’t count as a stitch) 2sc into same sc, 2sc, 2sc into same stitch.

Row 6: ch1 (doesn’t count as a stitch) 2sc into same sc, 4sc, 2sc into same dc.

Row 7: ch1 (doesn’t count as a stitch) 2sc into same sc, 6sc, 2sc into same sc.

Row 8: ch1 (doesn’t count as a stitch) sc along row.

Row 9: ch1 (doesn’t count as a stitch) sc2tog, 6sc, sc2tog.

Row 10: ch1 (doesn’t count as a stitch) sc2tog, 4sc, sc2tog.

Row 11: ch1 (doesn’t count as a stitch) sc2tog, 2sc, sc2tog.

Now sc around the edge.

Fasten off leaving long thread.


Black Strips – Make 4 

In black:

ch11.

Row 1: sc into 2nd ch from hook, sc along row.

Rows 2-5: ch1 (doesn’t count as a stitch) sc along row.

Fasten off leaving long thread to attach.


Light Beam

ch25, slip stitch into first ch to make a round.

Rounds 1-20: sc around.

Round 21: sc2tog, 4sc. Four times, sc.

Rounds 22-41: sc around.

Round 42: sc2tog, 3sc. Four times, sc.

Rounds 43-56: sc around.

Round 57: sc2tog, 2sc. Four times, sc.

Rounds 58-61: sc around.

Round 62: sc2tog, sc. Four times, sc.

Round 63: sc around.

Round 64: sc2tog four times, sc.

Fasten off leaving long thread.


Black Circle Button

In black:

Make a magic ring, ch1, 5sc into ring.

Round 1: sc around.

Round 2: working in back loops only, sc around.

Round 3: sc around.

Fasten off leaving long thread.

Black Extra Piece For Button Detail  
ch4.

Row 1: sc into 2nd ch from hook, sc along row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.


Assembly

  • Sew on the lightsaber details – Placing some stuffing into the black circle button and band button.
  • Stuff the lightsaber handle and light beam and sew together – You could put in some plastic or card tubing into the beam to make it more sturdy if you want.

Star Wars Crochet Pattern: Large R2-D2 (could have done with some Jedi force on this one!)


I was caught off guard a little while ago by a friends little one who asked me if I could make them a Star Wars R2-D2 toy, and without really thinking about it I said “yes of course, why not”. I’ve been quite busy with makes the last few weeks so I had forgotten all about it until I was reminded about my agreement by the little one – they never forget these things do they! I thought I better get started on it – how hard could it be….

It was only when I sat and actually looked up an image for ideas the sheer scale of the task dawned on me, the amount of detail to make sure he looks right is insane! What on earth have I agreed to, was one of the first things that popped into my mind and how on earth can I get out of this! However, once my initial panic subsided slightly I realised if I broke it down into sections it might not be as bad as I thought – still a mammoth task, but achievable!


So I got my wools together, cream, grey, blue and black, all of which were women’s institute DK wool, and got started. Obviously I had to start with the body first and this was the easy part (or so I thought) a giant tube with rounded top, although despite me thinking it would be the easiest bit it did give me a bit of a challenge getting the rounded top as I wanted, but finally I got there! The detailing on the head also took me a long time yo get right, there are so many different pictures of R2-D2 I didn’t know which to use so I opted to apply the details which appeared most frequently on the pictures.


Next were the legs which I split into two sections, which actually came together easier than I thought! I had a similar problem with the head detailing on the body – the details differ widely depending on what picture you look at, again I decided to apply the detail which appeared most frequently. I know all the detailing I have done is not entirely accurate to the original, but I tried my best and don’t think I have done too badly with it.

I was quite impressed with how I managed to get it to work out, and all my hard work was definitely worth while – the look on my friends little ones face was priceless. He just couldn’t believe I had managed to make one for him, he was so happy with it and it now goes everywhere with him!
Wool – DK (I used women’s institute DK from Hobbycraft)

Crochet R2-D2 Pattern:

Materials:

  • Cream 3x 100g balls.
  • Black 100g ball.
  • Blue 100g ball.
  • Red – few leftover lengths.
  • Biscuit brown – few leftover lengths.
  • 4mm hook.

Size:

Length (top of head to bottom of feet) – 37cm.

Width (leg to leg) – 34cm.


Head and body:

In grey:

Make a magic ring, ch1, 8sc into ring.

Round 1: 2sc into each stitch.

Round 2: 2sc into same stitch, sc. Repeat around.

Round 3: 2sc into same stitch, 2sc. Repeat around.

Round 4: 2sc into same stitch, 3sc. Repeat around.

Round 5: sc around.

Round 6: 2sc into same stitch, 4sc. Repeat around.

Round 7: 2sc into same stitch, 5sc. Repeat around.

Round 8: dc around.

Round 9: 2sc into same stitch, 6sc. Repeat around.

Round 10: sc around.

Round 11: 2sc into same stitch, 7sc. Repeat around.

Round 12: 2sc into same stitch, 8sc. Repeat around.

Round 13: sc around.

Round 14: 2sc into same stitch, 9sc. Repeat around.

Round 15: sc around.

Round 16: 2sc into same stitch, 10sc. Repeat around.

Round 17-30: sc around.

Change to blue:

Round 31-33: sc around.

Change to grey:

Round 34-37: sc around.

Change to off white:

Round 38-40: sc around.

Round 41: 10sc, sc2tog. Repeat around.

Round 42-73: sc around.

Round 74: in back loops only, sc2tog, 9sc. Repeat around.

Stuff body, leaving an inch or so empty at the top to stuff in a few rows time.

Round 75: sc2tog, 8sc. Repeat around.

Round 76: sc2tog, 7sc. Repeat around.

Round 77: sc2tog, 6sc. Repeat around.

Round 78: sc2tog, 5sc. Repeat around.

Round 79: sc2tog, 4sc. Repeat around.

Round 80: sc2tog, 3sc. Repeat around.

Round 81: sc2tog, 2sc. Repeat around.

Stuff the rest of the body.

Round 82: sc2tog, sc. Repeat around.

Round 83-84: sc2tog, sc. Repeat around.

Do one final sc2tog and fasten off.

Head Details:

Blue top circle:

In blue:

Make a magic ring, ch1, 8sc into ring.

Round 1: 2sc into each sc.

Round 2: 2sc into same stitch, sc. Repeat around.

Round 3: 2sc into same stitch, 2sc. Repeat around.

Fasten off, leaving long thread to attach.

Sew onto top of the head in the centre.

Blue side shapes (around under the top circle):

Make 6 of these, in blue:

ch5.

Row 1: sc into 2nd ch from hook, sc along row.

Row 2: ch1 (doesn’t count as a stitch) sc along row.

Row 3: ch1 (doesn’t count as a stitch) 2sc into same stitch, 2sc, 2sc into same stitch.

Row 4: ch1 (doesn’t count as a stitch) sc along row.

Row 5: ch1 (doesn’t count as a stitch) 2sc into same stitch, 4sc, 2sc into same stitch.

Row 6: ch1 (doesn’t count as a stitch) sc along row, and continue to school all the way around the edge, putting 2sc into each corner, slip stitch into first sc to fasten off.

Sew on to the body 3 rows down from the blue circle leaving a gap of 4sc between each one.

Front Camera:

Blue square part:

In blue:

ch8.

Row 1: sc into 2nd ch from hook, sc rest of row.

Row 2-7: ch1 (doesn’t count as a stitch) sc along row.

Now working in rounds around the edge:

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Round 2: ch1 (doesn’t count as a stitch) working into back loops only, sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach.

Black round camera part:

In black:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into each stitch.

Fasten off leaving long thread to attach.

Place small amount of stuffing into blue square and place and sew onto front of the head in the middle, then sew black round piece on to the middle of the blue square.

Grey round part:

In grey:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into each stitch.

Round 2: working in back loops only, sc around.

Round 3-4: sc around.

Change to black:

Round 5: 2sc into each stitch.

Place stuffing into piece and sew onto body beneath and to the right of the blue camera part.

Blue section with red spot:

In blue:

ch5.

Row 1: sc into second ch from hook and sc along rest of row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach. Sew on beneath blue square with black dot (front camera).

In red:

Make a magic ring, ch1. 6sc into ring.

Fasten off and sew onto the blue square on the right hand side. Then sew onto the body.

Blue square next to blue section with red spot:

In blue:

ch3.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-3: ch1 (doesn’t count as a stitch) sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch.

Fasten off leaving long thread to attach, sew onto body next to the red spot section.

Blue rectangle with grey and black square pieces:

In blue:

ch5.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-7: ch1 (doesn’t count as a stitch) sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Square pieces – make 2

In black:

ch3.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Change to grey:

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach.

Sew the blue rectangle onto the body and then sew the black and grey pieces on.

Small rectangle next to blue rectangle with black and grey square rectangles:

In blue:

ch3.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-7: ch1 (doesn’t count as a stitch) sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach, sew onto body next to black and grey rectangle piece.

Large rectangle:

In blue:

ch8.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-7: ch1 (doesn’t count as a stitch) sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach, sew onto body next to the small rectangle.

Larger horizontal rectangle:

In blue:

ch9.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-7: ch1 (doesn’t count as a stitch) sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach, sew onto body next to the larger rectangle.

Rectangle with grey line detail:

In blue:

ch6.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-7: ch1 (doesn’t count as a stitch) sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach, sew onto body next to the larger rectangle.

Fasten off leaving long thread to attach.

In grey complete a line of sc surface stitches starting 1 row down, and 1sc in from the right completing 3sc in total, then turn and compete 1 surface dc down and again turn and go back along the row back to the start of the surface stitches

Sew on to body next to rectangle.

Back telescope:

In black:

Make a magic ring, ch1. 8sc into ring.

Round 1: 2sc into each stitch.

Round 2: sc around on back loops only.

Round 3-4: sc around.

Fasten off leaving thread to attach

Sew onto body next to rectangle with grey line detail, placing a small amount of stuffing in.

Large blue rectangle with red spot:

In blue:

ch6.

Row 1: sc into second ch from hook and sc along rest of row.

Row 2-7: sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach. Sew on beneath blue square with black dot.

In red:

Make a magic ring, ch1. 6sc into ring.

Round 1: 2sc into each stitch.

Fasten off and sew onto the blue square onto the left middle of the rectangle. Then sew onto body next to the back telescope.

Two large matching blue rectangles:

Make two of these rectangles.

In blue:

ch3.

Row 1: sc into second ch from hook and sc along rest of row.

Row 2-7: sc along row.

Round 1: ch1 (doesn’t count as a stitch) sc around all four edges, slip stitch into top of the first ch1.

Fasten off leaving long thread to attach.

Sew onto body next to rectangle with red spot.

Two small matching blue rectangles:

Make two of these.

In blue:

ch9, then sc into second ch from hook and down the rest of the ch (8sc) then go back up the other side of the foundation ch (8sc) finishing with a slip stitch into the first sc.

Fasten off leaving long thread to attach. Sew onto body next to previous two matching rectangles.

Legs:

Main leg – make 2:

In cream:

ch9.

Row 1: sc into 2nd ch from hook and along rest of row.

Row 2: ch1 (doesn’t count as a stitch) 2sc into first stitch, 6sc, 2sc into last stitch.

Row 3: ch1 (doesn’t count as a stitch) 2sc into first stitch, 8sc, 2sc into last stitch.

Row 4: ch1 (doesn’t count as a stitch) 2sc into first stitch, 10sc, 2sc into last stitch.

Row 5: ch1 (doesn’t count as a stitch) 2sc into first stitch, 12sc, 2sc into last stitch.

Row 6: ch1 (doesn’t count as a stitch) 2sc into first stitch, 14sc, 2sc into last stitch.

Row 7-17: ch1 (doesn’t count as a stitch) sc along row.

Row 18: ch1 (doesn’t count as a stitch) sc2tog, 14sc, sc2tog.

Row 19: ch1 (doesn’t count as a stitch) sc2tog, 12sc, sc2tog.

Row 20: ch1 (doesn’t count as a stitch) sc2tog, 10sc, sc2tog.

Row 21: ch1 (doesn’t count as a stitch) sc along row.

Row 22: ch1 (doesn’t count as a stitch) sc2tog, 8sc, sc2tog.

Row 23-31: ch1 (doesn’t count as a stitch) sc along row.

Row 32: ch1 (doesn’t count as a stitch) sc2tog, 6sc, sc2tog.

Row 33: ch1 (doesn’t count as a stitch) sc along row.

Row 34: ch1 (doesn’t count as a stitch) sc2tog, 4sc, sc2tog.

Row 35: ch1 (doesn’t count as a stitch) sc along row.

Fasten off.

Long strip to join the front and back leg pieces:

In cream:

ch8.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-91: ch1 (doesn’t count as a stitch) sc along row.

Fasten off, leaving long thread to sew together.

Sew the front and back leg pieces together by placing the long piece in between the front and back piece and sewing one side to the front piece and then the other to the back piece, ensuring you stuff the leg before fully closing it off.

Foot:

Side pieces – make 2:

In cream:

ch11.

Row 1: sc into 2nd ch from hook and sc along row.

Row 2: ch1 (doesn’t count as a stitch) 2sc into same stitch, 8sc, 2sc into same stitch.

Row 3: ch1 (doesn’t count as a stitch) sc along row.

Row 4: ch1 (doesn’t count as a stitch) 2sc into same stitch, 10sc, 2sc into same stitch.

Row 5: ch1 (doesn’t count as a stitch) sc along row.

Row 6: ch1 (doesn’t count as a stitch) 2sc into same stitch, 12sc, 2sc into same stitch.

Row 7: ch1 (doesn’t count as a stitch) sc along row.

Row 8: ch1 (doesn’t count as a stitch) 2sc into same stitch, 14sc, 2sc into same stitch.

Row 9: ch1 (doesn’t count as a stitch) sc along row.

Row 10: ch1 (doesn’t count as a stitch) 2sc into same stitch, 16sc, 2sc into same stitch.

Row 11: ch1 (doesn’t count as a stitch) sc along row.

Row 12: ch1 (doesn’t count as a stitch) 2sc into same stitch, 18sc, 2sc into same stitch.

Fasten off.

Front and back pieces – Make 2:

In cream:

ch9.

Row 1: sc into 2nd ch from hook, sc rest of row.

Row 2: ch1 (doesn’t count as a stitch) 2sc into same stitch, 6sc, 2sc into same stitch.

Row 3: ch1 (doesn’t count as a stitch) sc along row.

Row 4: ch1 (doesn’t count as a stitch) 2sc into same stitch, 8sc, 2sc into same stitch.

Row 5: ch1 (doesn’t count as a stitch) sc along row.

Row 6: ch1 (doesn’t count as a stitch) 2sc into same stitch, 10sc, 2sc into same stitch.

Row 7: ch1 (doesn’t count as a stitch) sc along row.

Row 8: ch1 (doesn’t count as a stitch) 2sc into same stitch, 12sc, 2sc into same stitch.

Row 9: ch1 (doesn’t count as a stitch) sc along row.

Row 10: ch1 (doesn’t count as a stitch) 2sc into same stitch, 14sc, 2sc into same stitch.

Row 11: ch1 (doesn’t count as a stitch) sc along row.

Row 12: ch1 (doesn’t count as a stitch) 2sc into same stitch, 16sc, 2sc into same stitch.


Top piece:

In cream:

ch9.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-10: ch1 (doesn’t count as a stitch) sc along row.

Fasten off.

Bottom piece:

In cream:

ch21.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-22: ch1 (doesn’t count as a stitch) sc along row.

Fasten off.

Sew the side pieces to the front and back pieces, then sew the top piece on, stuff the foot then sew the bottom piece on.  Next sew this foot part onto the leg.



Leg detail:

Grey Circle at top of leg – make 2:

In grey:

Make a magic ring, ch1.

Round 1: 2sc into each stitch.

Round 2: 2sc into same stitch, sc. Repeat around.

Round 3: 2sc into same stitch, 2sc. Repeat around.

Round 4: sc around.

Fasten off leaving long thread to attach.

Sew grey circle onto the outside of the leg at the top.

Blue detail on side of leg – make 2:

8sc.

Row 1: sc into second ch from hook, sc along rest of row.

Row 2-18: ch1 (doesn’t count as a stitch) sc along row.

Fasten off.

Fasten on 8 rows down on one side, ch1 then 8sc up along the rows, then sc along the top edge, and 8sc down the rows on the next side.

Turn leaving the remaining stitches unworked, ch1 (doesn’t count as a stitch) then sc back around the sc stitches just completed.

Fasten off.

Sew the long leg detail at the top to the edge of the sc completed around the edge of the leg detail.

Put padding into top end of blue leg detail and start to sew onto the leg at the bottom of the grey circle, then sew the rest of blue detail onto the leg.

Foot wire detail – Make 4:  

In a beige colour:

ch6, slip stitch into first ch to make a round.

Row 1: ch1 (doesn’t count as a stitch) sc around.

Row 2-18: sc around.

Fasten off leaving thread to attach.

Sew on two to each foot, sewing one end in the middle of the foot and sewing the other end around into the inside of the foot. Sew the second just below the first.


Grey Leg connector to the body: 

In grey:

ch40.

Slip stitch into first sc to make a round.

Round 1: ch1 (doesn’t count as a stitch) sc around.

Round 2-3: sc around.

Fasten off leaving length to attach.

Sew the grey leg connector onto the leg then sew onto the body.

Body details – front:

Blue strips on front – make 3:

In blue:
ch18.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2: ch1 (doesn’t count as a stitch) 2sc into same sc, sc along row, 2sc into last sc.

Row 3: ch1 (doesn’t count as a stitch) sc2tog, sc along row, sc2tog in the last 2sc.

Fasten off leaving length to attach.

Sew each on at the top of the body in the middle beneath the grey band.

Grey circle detail:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into same sc. Repeat around.

Round 2: 2sc into same sc, sc. Repeat around.

Round 3: sc around.

Fasten off leaving thread to attach.

Sew onto the body at the bottom right.

Blue panel with 2 grey squares detail:

Blue panel:

In blue:

ch11.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-15: ch1 (doesn’t count as a stitch) sc along row.

Fasten off, leaving length to attach.

Grey squares – make 2:

In cream:

ch6.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Change to grey (without fastening off):

Row 2-3: ch1 (doesn’t count as a stitch) sc along rest of row.

Change back to white (without fastening off):

Row 4-5: ch1 (doesn’t count as a stitch) sc along rest of row.

Change back to grey:

ch1 and sc around all 4 edges, slip stitch into ch1 at start of round.

Fasten off leaving thread to attach.

Sew onto the blue panel, it will be quite a tight fit so one will go very close to the top edge and one will be very close to the bottom edge with a very small gap in between.

Sew on the completed blue panel onto the front of the body just beneath (leave one row) and in the middle of the three blue stripes.

Small blue rectangle:

In blue:

ch8.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-5: ch1 (doesn’t count as a stitch) sc along rest of row.

Fasten off leaving length to attach.

Sew onto body 1 row beneath and in the middle of the blue panel with grey squares.

Next in grey, ch12 slip stitch into first ch to make a round. Fasten off leaving thread to attach and sew this circle onto the blue rectangle.

Small grey rectangle:

In grey:

ch6.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-6: ch1 (doesn’t count as a stitch) sc along rest of row.

ch1, sc around all four edges, slip stitch into ch1 at start to finish. Fasten off leaving long thread to attach.

Sew on to body with the shortest side next to small blue square.

Large grey square:

In grey:

ch8.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-6: ch1 (doesn’t count as a stitch) sc along rest of row.

ch1, sc around all four edges, slip stitch into ch1 at start to finish. Fasten off leaving long thread to attach.

In blue hand sew five vertical lines equally spaced apart.

Sew on next to small grey square.


Blue 6 line detail – make 6:

These lines go next to the blue panel with grey squares.

ch7, fasten off leaving thread to attach.

Sew onto body next to the blue panel (5sc away) with grey squares, leaving 1 row between each line.


Body details – back:

Grey Circle detail:

In grey:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into same sc. Repeat around.

Round 2: 2sc into same sc, sc. Repeat around.

Round 3: sc around.

Fasten off leaving thread to attach.

Sew onto the body at the bottom right.

Grey rectangles – make 2:

ch6.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-6: ch1 (doesn’t count as a stitch) sc along rest of row.

ch1, sc around all four edges, slip stitch into ch1 at start to finish. Fasten off leaving long thread to attach.

Sew one next to the small grey circle, with the long side facing the base. The second goes next to the small grey square, again with the long side facing the base.

Large grey rectangle:

In grey:

ch8.

Row 1: dc into 2nd ch from hook, sc along rest of row.

Row 2-6: ch1 (doesn’t count as a stitch) sc along rest of row.

ch1, sc around all four edges, slip stitch into ch1 at start to finish. Fasten off leaving long thread to attach.

Sew on next to the small rectangle, with the shortest side facing the bottom.

In cream sew on one horizontal line and 4 vertical lines.


Small grey square:

In grey:

ch5.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Row 2-4: ch1 (doesn’t count as a stitch) sc along rest of row.

ch1, sc around all four edges, slip stitch into ch1 at start to finish. Fasten off leaving long thread to attach.

Sew on next to the small great rectangle.