Sewing Tutorial: Bright And Flowery iPad Case

I recently completed an iPad case tutorial for The Craft Cotton Company using their new lovely floral sketches fat quarter set. I added on a pocket for storing a USB cable – no excuse for misplacing them with one of these cases! 

Fabric was gifted by The Craft Cotton Company.


Link to this free tutorial and many more over on their blog.

Sewing Tutorial: Fabric Scrap Busting Project – Patchwork Pattern Weights Pattern   

A huge help for pattern cutting and made only with fabric scraps, these pattern weights are a must have that I wish I had made sooner!  

I’ve been meaning to make some pattern weights for a while now and just haven’t got around to doing them. Now that I have got them made I wish I had got them made sooner – they are absolutely brilliant for holding patterns in place while cutting out without having to mess around with pins which also often leave marks in the fabric. In fact I was so pleased with how well these worked I went on a bit of a making spree and at current count have about 30 of these little gems! 


What’s even better about these weights is I made them all with just scraps of fabric out of my stash and anything that can help use up some scraps is a winner with me! 

Fabric Pattern weight pattern:

I made two different sizes of these weights, so had had some longer ones for long pattern sections. The method to make both sizes is the same, the only difference being the size of paper template used.  

Materials 

  • Fabric scraps
  • Ribbon scraps
  • Thread
  • Pins
  • Scissors
  • Paper
  • Pencil
  • Ruler
  • Aquarium gravel 

  1. Make your paper templates, 7×7 cm for the smaller weights and 10×7 cm for the larger rectangular ones and cut out your fabrics. 
  • Cut your ribbon into 7cm pieces 
  • Fold a piece of ribbon in half and place with its raw edges just over the raw edges of a piece of fabric placed right side up. 
    • Place a second piece of fabric right side down on top of this and sew down the side, along the bottom and up the other side.
    • Cut Diagonally across at the bottom 2 corners to help with getting a nice sharp corner after turning.

  • Turn the right way out, and fill with gravel.
  • Fold in the top edge by 0.5m and match the two side seams together, slip stitch to close. 
  • Now make as many as you need, and maybe just a couple more incase you run out while cutting out a pattern…think I definitely got carried away, don’t think I will be running out any time soon! 

Sewing Tutorial: Christmas Drawstring Bottle Bag

Better solution for gifting bottles in this year rather than fighting with a piece of wrapping paper!

I always have problems wrapping up bottles as gifts, although to be honest anything that isn’t a square box tends to give me problems! I can never get the paper to look right without it tearing a few times and rather than just buying a paper bottle bag I thought I would make one.  I wanted to make something a bit different to my previous crochet bottle holder that I made so I thought I would do a fabric one using some very cute Craft Cotton Company penguin fabric.

I am really impressed with how this came out, I might do some smaller ones for some beer bottles I have as gift too – obviously I don’t have enough things I need to make in time for Christmas already!

Fabric was gifted by The Craft Cotton Company.

Drawstring bottle bag tutorial:  

Materials:

  • Christmas Fabric:
    • One piece 31cm x 29cm (Penguin pattern).
    • One piece 31cm x 9cm (zig zag pattern).
  • Scissors.
  • Pins.
  • Ribbon.

Assembly:

  • Place the zigzag fabric piece right sides together at the top of the penguin fabric with the bottom edge of the zigzag fabric lined up with the top edge of the penguin fabric and sew along to join.
  • Fold the fabric in half with the red zigzag fabric along the top of the bag and place right sides together.  Now starting 6 1/2 Inches from the top of the fabric sew down the side and along the bottom of the bag.  Turn out the right way.

  • Fold over the top edge by 1cm, and then on both the front and back side seams, fold in the raw edges by 1 cm.  Next fold the zigzag fabric inwards so it lines up with where you started sewing the front and back together – now pin and sew along the bottom edge. Now sew another line 2cm up from the previous line.
  • Thread through the ribbon for the drawstring, fold over the end of the ribbon a few times and sew to stop it fraying.
  • Slipstitch closed the side seam above the drawstring section.

Crochet Frog Hat From Vanessa Mooncie’s Crochet Animal Hats

Jumping in just in time for the colder weather is a frog woolly hat!

Im glad I have managed to get some time to get this frog hat made, the colder weather is starting to creep in and it won’t be long before I will be needing a hat to keep the chill at bay! 


I saw this frog in Vanessa Mooncie’s book Crocheted animal hats and it stood out above of all the wonderful hats as the first I needed to make – I know for a fact many more of these hat makes will follow – they are just brilliant, I’m not too sure which to do next but I need to get cracking as I’m hoping to make some more of these as Christmas presents for friends, although I think I may be running out of time – in sure they won’t mind getting them a little late!

 

Sewing Some Fabric Pumpkins: Almost time to go pick a pumpkin, until then here are some fabric ones! 


These fabric pumpkins were so easy to make and they look great, I think might make some bigger ones to go with these!  

I have seen quite a few fabric pumpkins on my Pinterest feed lately and really wanted to make some for Halloween. It was only while rummaging through my craft drawer yesterday looking for some wool when I suddenly realised I still had some orange and green The Craft Cotton Company fabric left over from when I made the hexagon patchwork spider (Brights fat quarter bundle). I knew this fabric would be perfect to make some, so I got cracking making them. I really need to sort out my craft drawer – there’s all sorts hidden away in there! 

The tutorial I followed was on: 

http://thompsonfamily.typepad.com/thompson_familylife/2009/11/fabric-pumpkin-tutorial.html
I chose to make three pumpkins in total, each different in size: 

First – 7×14 inches 

Second – 4×8 inches 

Third – 3×6 inches 


  

 

Crochet Mini Witches Hats Pattern – Perfect For Halloween Decorations

Halloween wouldn’t be complete without some cackling witches lurking about, so I thought of doing these witches hat decorations, it should keep people on their toes – you never know when the witch might come cackling back to get it!


You could do these as big or as small as you wanted, I opted to do mine quite small so I could get quite a few dotted about the house. Also the colour of the band around it could be any colour that you like best. I opted for purple and green for mine as I like those colours for Halloween.


Crochet witches hats pattern

Materials:

  • Black wool for the hat – 50g ball of DK wool.
  • Different coloured wool for the band around the hat – 25g ball of DK wool.
  • 4mm hook.

Large Hat:

For the Hat Base:

4mm hook, in black:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into each sc.

Round 2: 2sc into same sc, sc. Repeat around.

Round 3: 2sc into same sc, 2sc. Repeat around.

Round 4: 2sc into same sc, 3sc. Repeat around.

Round 5: 2sc into same sc, 4sc. Repeat around.

Round 6: 2sc into same sc, 5sc. Repeat around.

Round 7: 2sc into same sc, 6sc. Repeat around.

Round 8-9: sc around.

Fasten off.

For the main hat:

4mm hook, in black:

Make a magic ring, ch1, 4sc into ring.

Round 1: 2sc into each stitch.

Round 2-3: sc around.

Round 4: 2sc into same sc, sc. Repeat around.

Round 5-6: sc around.

Round 7: 2sc into same sc, 2sc. Repeat around.

Round 8: 2sc into same sc, 3sc. Repeat around.

Round 9: sc around.

Round 10: 2sc into same dc, 4sc. Repeat around.

Round 11: 2sc into same dc, 5sc. Repeat around.

Round 12: sc around.

Round 13: 2sc into same dc, 6sc. Repeat around.

Round 14-18: sc around.


Fasten off leaving long thread to attach to the base, stuff the main hat part, then sew the hat to the base.

Band around hat:

In your chosen colour, 4mm hook:

ch4.

Row 1: sc into 2nd ch from hook, sc along rest of row.

Rows 2-34: ch1 (doesn’t count as a stitch) sc along row.


Fasten off and leave a long thread to attach around the hat at the base.

Small hat:

For the hat base:

4mm hook, in black:

Make a magic ring, ch1, 6sc into ring.

Round 1: 2sc into each sc.

Round 2: 2sc into same sc, sc. Repeat around.

Round 3: 2sc into same sc, 2sc. Repeat around.

Round 4: 2sc into same sc, 3sc. Repeat around.

Round 5: 2sc into same sc, 4sc. Repeat around.

Round 6: sc around.

Fasten off.

Main hat part:

4mm hook, black wool.

Make magic ring, ch1, 4sc into ring.

Round 1: 2sc into each sc.

Round 2: sc around.

Round 3: 2sc into same sc, sc. Repeat around.

Round 4-5: sc around.

Round 6: 2sc into same sc, 2sc. Repeat around.

Round 7: sc around.

Round 8: 2sc into same sc, 3sc. Repeat around.

Round 9: sc around.

Round 10: 2sc into same sc, 4sc. Repeat around.

Round 11: sc around.


Fasten off leaving long thread to attach to base. Stuff the main hat part, then sew onto the base.

Hat Band:

In your chosen colour, 4mm hook:

ch3.

Row 1: sc into 2nd ch from hook, sc.

Rows 2-21: ch1 (doesn’t count as a stitch), sc along rows